Let’s look at the standard ukulele tuning. The frets also help tune your ukulele in case you’re doing it by ear. They make navigating the fretboard much easier - for example, when forming chord shapes. Frets are small metal bars that divide the fretboard into sections. Whereas the tuning pegs are used to control the tuning, machine heads are the part that is attached to the ukulele headstock. Although both are often referred to as tuners, the tuning pegs and machine heads are two different parts with their own purpose. These are also known as tuning heads, tuning knobs, or simply tuners. Therefore, there’s a tuning peg for each string of the instrument. Tuning pegs are the tiny knobs that you rotate to tune an individual ukulele string. The headstock is the topmost part of a ukulele and starts where the neck and fretboard end. First, there’s the headstock to which all other parts of the tuning mechanism are connected. The ukulele tuning mechanismīefore tuning your ukulele, you should get familiar with the different parts of a ukulele that are needed to get the instrument in tune. This is because of the way a ukulele is normally tuned. The second string, or the C string, is the thickest one. Note that, unlike the strings of a guitar, ukulele strings don’t go from thickest to thinnest. In this case, the G string is referred to as the fourth string, the C string as the third string, and so forth. Ukulele strings can also be referred to with a number from 1 to 4. The strings of a ukulele are, starting from the one closest to you when holding the instrument: G-C-E-A. Luckily there are only four of them, so they’re easy to remember.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |